


3Dresyn WC1 MF Clear, water washable and cleanable Monomer Free resin
Product description
3Dresyn WC1 MF Clear is a clear water-cleanable photopolymer designed for easy and fast washing and cleaning with water of 3D prints and resin tanks.
This monomer free material is formulated for SLA, DLP & LCD 3D printing workflows requiring water cleanability, medium hardness, high rigidity and very low viscosity.
Application framework
Designed for vat photopolymerization workflows including SLA, DLP and LCD 3D printing, where easy washing and cleaning with water of printed parts and resin tanks is required.
Typical applications
- Water-cleanable 3D prints
- Easy washing and cleaning of resin tanks and vats
- Clear printed parts for professional and commercial SLA, DLP and LCD workflows
Measured mechanical properties
- Tensile strength: <40 MPa (ISO 527-1 / ISO 527-2)
- Flexural strength: <40 MPa (ISO 178)
- Young’s modulus: 1000-2000 MPa (ISO 527)
- Elongation at break: <20% (ISO 527)
- Shore hardness: D70-80 (ISO 868)
Measured physical properties
- Appearance: clear, non colored
- Viscosity: <100 mPas at 23°C ± 2°C (ISO 3219)
- Shrinkage: very low
Functional performance characteristics
- Easy and fast washing and cleaning with water of 3D prints and resin tanks (vats)
- Clear, non colored for eco waste disposal
- 100% biocompatible and ultra safe
- Monomer Free MF
- Medium hardness
- High rigidity
- Very high resolution
- Increased durability of the resin tank
Processing and handling performance
- Printable by most commercial and professional SLA, DLP & LCD 3D printers
- Water-cleanable processing workflow
Chemical and safety characteristics
- 100% biocompatible and ultra safe
- Monomer Free MF
- Organo-tin free
Testing & processing disclaimer
Final print quality, cleanability, part performance and resin tank durability depend on printer type, exposure settings, part geometry, cleaning workflow and post-processing conditions, and must be validated by the user.
Disclaimer
This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.
This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.
Document reference: TDS-3DRESYN-WC1-MF-CLEAR-EN | Version: 1.0 | Last updated: March 2026
Choose options


