Technical documentation

This page explains how to access technical information related to 3Dresyns® materials. It does not duplicate data already available elsewhere on the website, but clarifies where specific types of information are provided and how additional documentation can be requested.

Technical properties and material data

Detailed technical properties, performance data and material characteristics are provided directly on individual product pages.

Product pages typically include, where applicable:

Mechanical and thermal properties
Printing parameters and technology compatibility
Post-processing recommendations
Application-specific notes

Technical data should therefore be consulted at the product level.

Safety Data Sheets (SDS / MSDS)

Safety Data Sheets are provided upon request in accordance with regulatory requirements and internal data management policies.

This controlled access ensures correct document versioning, regulatory compliance and appropriate use of confidential information.

Requests should specify the product(s) of interest and the intended application.

Instructions for Use (IFU)

Instructions for Use are available for selected materials and applications, where required by regulatory or application context.

IFUs may cover:

Intended use and limitations
Handling and storage conditions
Printing and post-processing considerations

Availability depends on material type and end-use.

Printing and post-processing guidelines

General guidance on printing and post-processing is provided through existing technology- and application-specific pages.

These pages address topics such as:

Vat photopolymerization workflows
Cleaning and curing procedures
Support strategies and surface finishing

Users should refer to the relevant technology and application sections for detailed process guidance.

Additional technical support

For questions not addressed through existing pages, 3Dresyns® provides direct technical support.

Support may include material selection guidance, application-specific recommendations and discussions related to custom formulations.

Contact with the technical team is recommended for project-specific requirements.