3D-ADD Slip1 Bio, slip additive for increasing the slip of 3D prints

3D-ADD Slip1 Bio is an ultra effective bio slip additive for increasing the slip of 3D prints.

It is designed for use with 3D printed resins at low dosage to increase slip without affecting the clarity or color of 3Dresins.

Designed for use with SLA, DLP & LCD 3D resins to increase the slip of 3D printed materials.

• Increasing the slip of SLA, DLP & LCD 3D printed resins

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Recommended dosage: <1-2%
• Clear liquid

• Slip additive
• Excellent increase of slip
• Excellent compatibility and stability with SLA, DLP & LCD 3D resins
• Does not affect the clarity nor the color of 3Dresins

• Add it in steps of 0.5% since excessive dosage can cause delamination in some 3D resins
• Please do not expose any 3D resins to natural or room light to prevent their curing.

• Bio based

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Slip and anti slip additives
• Functional Additives

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)