3Dresyn Bio plasticizer MF3 HV LP , high viscosity lipophilic monomer free biocompatible High Viscosity plasticizer for plasticising 3D resins

Product description

3Dresyn Bio plasticizer MF3 HV LP is our high viscosity lipophilic monomer free biocompatible plasticizer for plasticising 3D resins.

This non reactive polymer is normally used up to 10-30% dosage, or more depending on printer and rigidity specifications for certain thickness, and it is used for adjusting the rigidity of any 3Dresyn to your personal choice.

Application framework

Designed for use as a plasticizing additive in vat photopolymerization workflows for adjusting the rigidity of compatible 3Dresyn formulations.

Typical applications

• Plasticising 3D resins
• Adjusting rigidity of compatible 3Dresyns
• Custom formulation refinement of 3D resins

Measured physical properties

• Viscosity: <20.000 mPas at 20C

Functional performance characteristics

• Excellent plasticizing performance
• Monomer free
• Biocompatible, resorbable, absorbable and biodegradable
• Clear, non yellowing
• Lipophilic LP version
• Very low solubility in water
• Non-whitening effect: it does not decrease clarity of clear 3Dresyns

Processing and handling performance

• Normally used up to 10-30% dosage, or more depending on printer and rigidity specifications for certain thickness
• Supplied as a kit, which contains one 250 grams bottle of 3Dresyn Bio plasticizer MF3 HV LP, 1 measuring flask to measure exactly the minimum volume of 3Dresyn needed for adjusting rigidity and 1 empty 250 mL black bottle to mix, keep and protect the adjusted 3Dresyn from daylight
• Please do not expose any 3D resins to direct natural or artificial room light to prevent curing

Chemical and safety characteristics

• Synthetic and bio based resin source
• Non reactive polymer
• Biocompatible, resorbable, absorbable and biodegradable

Testing & processing disclaimer

Final plasticizing effect, rigidity adjustment, printability and clarity depend on the base resin, additive dosage, printer, part thickness and full processing workflow, and must be validated by the user.

Disclaimer

This material is supplied as a professional manufacturing additive and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-3DRESYN-BIO-PLASTICIZER-MF3-HV-LP-EN | Version: 1.0 | Last updated: March 2026