3Dresyn GrapNSEK1-SWCNT Bio is our biocompatible single wall carbon nanotubes based electrically (and thermally) conductive non soluble (after printing) 3D resin for 3D printing conductive materials
Typical conductivity readings (films of 250 microns)*:
- Sheet resistance <400 – 4 000 kΩ/square
- Resistivity <1×10⁴ – 1×10⁵ Ω.cm
- Conductivity >1-10 mS/m
Features of 3Dresyn GrapNSEK1-SWCNT Bio:
- ready to print biocompatible single wall carbon nanotubes based electrically conductive non soluble 3D resin
- excellent printability with most SLA DLP and LCD printers*
- biocompatible
- Z layer thickness of >20-40 microns (>0.02-0.04 mm) are recommended even in low power printers*
- water cleanable/washable
After placing your order request our more detailed Instructions for Use "IFU" for your specific SLA, DLP & LCD printer technology: info@3dresyns.com
For more info read: Instructions for Use IFU for conductivity resin systems
IMPORTANT: The product has a guaranteed shelf life of 6 months if kept between 15 and 25ºC, but in practice it can have a longer shelf life.
