3Dresyn IS1 Ivory Stone 3D resin with stone-like satin finish

Product description

3Dresyn® IS1 Ivory Stone is a natural ceramic-filled photopolymer designed for direct 3D printing of ivory-like jewelry, delivering a stone-like satin finish with opaque ivory appearance and mineral-rich composition.

Application framework

Designed for use in SLA, DLP and LCD vat photopolymerization systems within controlled professional environments. Suitable for direct manufacturing of decorative and wearable components requiring ivory-like aesthetics, stone feel and high detail.

Typical applications

• Rings, pendants, earrings, bracelets, charms and beads
• Ivory-like decorative jewelry components
• Fashion hardware and premium accessories
• Design prototypes and final wearable parts

Measured mechanical properties

• Color/appearance: natural ivory, opaque
• Hardness: Shore D85–90 (ISO 868)
• Tensile strength: >50 MPa (ISO 527)
• Flexural strength: >70 MPa (ISO 178)
• Young’s modulus: 2500–3500 MPa (ISO 527)
• Elongation: <2% (ISO 527)
• Shrinkage: very low
• Resolution: very high

Functional performance characteristics

• Ceramic-filled formulation with stone-like behavior
• Opaque ivory appearance with natural mineral character
• Satin finish suitable for jewelry applications
• Ultra hard and tough (UHT) balance for wearable durability
• High tensile and flexural strength
• Good scratch and wear resistance
• Durable performance under normal use conditions
• Very low shrinkage for dimensional accuracy
• Very high resolution
• Organo-tin free formulation
• Synthetic and mineral-based resin source

Processing and handling performance

• Compatible with SLA, DLP and LCD systems (365–405 nm)
• Typical layer thickness: 25–100 μm (recommended 50 μm for fine jewelry detail)
• Mix thoroughly before use to ensure homogeneous ceramic distribution
• Supports: fine contact points recommended on visible surfaces
• Cleaning: short, efficient wash; avoid prolonged solvent exposure
• Finishing: suitable for wet sanding and polishing to achieve satin, matte or polished finishes
• Formulated to support extended resin tank durability

Testing & processing disclaimer

Material performance depends on printer type, exposure conditions, geometry, post-processing and finishing workflow. Optical appearance, surface quality and mechanical behavior must be validated by the user for each specific application.

Why choose 3Dresyn® IS1 Ivory Stone

• Authentic ivory-like appearance with mineral-filled formulation
• Direct 3D printing of finished jewelry pieces
• High mechanical strength suitable for wearable parts
• Excellent surface detail and finishing versatility
• Durable with good scratch and wear resistance
• Very low shrinkage and high dimensional stability
• Compatible with most SLA, DLP and LCD systems
• Organo-tin free formulation

Regulatory & legal notice

This material is supplied as a professional manufacturing material and is not marketed as a finished product. It is not certified as a medical device or implant. Final performance, skin compatibility and application suitability remain the responsibility of the user.

Document reference: TDS-IS1-IVORY-STONE-EN | Version: 1.0 | Last updated: March 2026