3Dresyn LJ1 Liquid Jade for direct 3D printing of Jade Jewelry

3Dresyn LJ1 Liquid Jade  is our natural ceramic-filled 3D resin with stone-like satin finish for direct 3D printing of jade-like jewelry

Features & benefits

•  natural jade stone-like 3D resin for direct 3D printing of opaque jade-look jewelry

• designed for very high detail jade stone-like color finishes with very low shrinkage

• ultra hard & tough (UHT) balance for wearable parts

• natural jade color with high mineral content

• high tensile and flexural strength 
  

• durable: good scratch and wear resistance

• very high resolution

• printable by most commercial and professional SLA, DLP & LCD 3D printers

• formulated for increased durability of the resin tank
  

• organo-tin free

Typical applications

• rings, pendants, earrings, bracelets, charms, beads

• fashion hardware and decorative components

Typical physical & mechanical properties 

• color/appearance: natural transparrent emerald

• Hardness: Shore D 85–90 

• Tensile strength:  >50 MPa

• Flexural strength:  >70 MPa

• Young’s modulus: 2500–3500 MPa

• Elongation at break: <2%

• Shrinkage: very low

• Resolution: very high

Values are indicative and depend on printer, settings, post-processing, geometry, and test conditions.

Printer compatibility

• SLA, DLP & LCD systems operating at 365–405 nm

• Layer thickness: 25–100 μm (recommend 50 μm for jewelry detail)

Processing guidelines

• mixing: shake/stir thoroughly before every use to re-suspend particles

• supports: fine contact points on polishable faces; increase density for heavy parts (higher density composite)

• cleaning: brief, efficient wash (IPA or our recommended cleaning fluids). Avoid long soaking if IPA is used

• drying: short rest to allow solvent evaporation

• finishing: wet sanding & polishing to mirror; matte by light blasting/micro-abrasion

Design & use notes

• feel & weight: higher density for a premium, stone-like feel

• fit: allow +0.05–0.10 mm extra clearance for tight assemblies

• skin contact: ensure full cure and smooth finishing for comfort

Safety & handling

• organo-tin free. This product is not certified as a medical device or implant

Storage & shelf life

• store tightly closed, 15–25 °C, away from light and heat

• mix well before use; particles will settle over time

• shelf life: typically 12 months