3Dresyn PP TFA60 Tough & Foldable A60

3Dresyn PP TFA60 is a tough, elastomeric photopolymer formulation designed to provide high flexibility, elasticity and foldability while maintaining structural integrity. The material enables the fabrication of durable components capable of undergoing large deformation and repeated compression without cracking or permanent damage.

This formulation is engineered to deliver a soft rubber-like mechanical profile (Shore A scale), making it particularly suitable for applications requiring high compliance, surface adaptation and efficient stress distribution.

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional and industrial environments for soft, elastic and impact-resistant components.

Particularly suitable for soft elastomeric printing plates where high compression, enhanced conformity and repeated deformation cycles are required.

• Flexographic (flexo) printing plates (soft-medium hardness range)
• Pad printing clichés with enhanced surface conformity and ink transfer
• Soft-contact printing plates for curved, irregular or compressible substrates
• Relief printing plates requiring high elastic deformation
• Soft lithography and microcontact printing
• Flexible plates for packaging, labeling and soft materials
• 3D printed plates and panels
• Highly flexible functional components

• Tensile strength: <10 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <10 MPa (ISO 178)
• Young’s modulus: <10 MPa (ISO 527)
• Elongation at break: >50% (ISO 527)
• Shore hardness: A60 (ISO 868)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Printing shrinkage: no measurable dimensional shrinkage after calibration under validated processing conditions
• Resolution capability: very high (process-dependent)
• Color stability: non-settling formulation
• Viscosity: optimized within the processing range required for the intended printing process and application

• Tough elastomeric (non-brittle) material behavior
• High flexibility and foldability without breaking
• High impact and shattering resistance
• Very low modulus enabling large deformation under load
• Durable under repeated mechanical stress
• High compression capability enabling improved substrate conformity
• Enhanced elastic recovery for repeated printing cycles
• Suitable for cyclic deformation environments such as flexographic and pad printing

• Printing technologies: SLA, DLP and LCD
• Compatible with most commercial and professional systems when properly calibrated
• Stable processing and reliable printability
• Increased durability of the resin tank during printing

• Contact behavior: soft elastomeric (high compression)
• Ink transfer: driven by deformation and surface conformity
• Recovery: high elastic recovery after compression cycles
• Best suited for: flexographic printing plates and pad printing clichés
• Flexo note: suitable for medium-to-low pressure printing and irregular substrates
• Pad printing note: enhanced ink pickup and release due to high compliance

• Monomer-based (MB) formulation
• Reactive components may present irritation hazards prior to full polymerization
• Final material properties depend on proper post-curing and cleaning
• Synthetic resin base
• Organo-tin free formulation

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, exposure conditions, layer thickness, build orientation and post-processing workflow.

This material is supplied as a professional manufacturing material for engineering and printing workflows. It is not marketed as a finished product. Final part performance and suitability, including safety and biocompatibility, must be validated by the user after proper post-processing.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Engineering & Functional 3D Resins
• Next-Generation Functional 3D Printing Resins

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)