Phosphorescent Yellow Green Color

3Dresyns Phosphorescent Yellow Green Color is a coloring additive for coloring SLA, DLP & LCD 3D resins with a phosphorescent yellow green shade.

This product is supplied in 10 grams powder samples. It is designed for use at small dosage levels and provides a bright and clean luminiscent / phosphorescent yellow green shade.

Designed for coloring SLA, DLP & LCD 3D resins with a phosphorescent yellow green shade. Compatible with all our 3Dresyns and with most commercial SLA, DLP & LCD 3D resins.

• Coloring SLA, DLP & LCD 3D resins with a phosphorescent yellow green shade

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Recommended dosage: 0.2-0.8% by weight
• Supplied in 10 grams powder samples
  
• Each 10 grams color sample is enough for coloring up to 3-5 kgs of 3D resins

• Bright and clean luminiscent / phosphorescent yellow green shade
• Excellent color yield and strength even at very low dosage
• Excellent light fastness

• Compatible with all our 3Dresyns and with most commercial SLA, DLP & LCD 3D resins
• Please do not expose any 3D resins to natural or room light to prevent their curing
• They are normally used at small dosage (0.2-0.8% by weight)

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• 3Dresyns Colors

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)