Food grade Bio Colors

3Dresyns Food grade Bio Colors are coloring additives for SLA, DLP & LCD resins. They are supplied as easy to disperse powders and are intended to color 3D resins with metallic and non metallic effects.

These food grade Bio Colors are normally used at small dosage and provide good color yield and strength even at very low dosage. They are supplied in 10 grams samples in a range of available colors.

Designed for coloring SLA, DLP & LCD resins. Compatible with all our 3Dresyns and with most commercial SLA, DLP & LCD 3D resins.

• Coloring SLA, DLP & LCD resins
• Generation of special metallic and non metallic effects in 3D resins

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Recommended dosage: 0.2-0.4% by weight
• Each 10 grams color sample is enough for coloring up to 5 kgs of 3D resins
• Supplied as 10 grams samples

• Special metallic and non metallic effects
• Good color yield and strength even at very low dosage
• Lower light fastness than the rest of our offered colors
• Easy to disperse powders

• Compatible with all our 3Dresyns and with most commercial SLA, DLP & LCD 3D resins
• Can settle down in the bottle. Mix them well in the 3D resin before printing
• Please do not expose any 3D resins to natural or room light to prevent their curing
• For non settling order NextGen colors
• Available colors include Food grade bio metallic white, Food grade bio Bordeaux, Food grade bio Copper, Food grade bio metallic red, Food grade bio metallic violet, Food grade bio bronze, Food grade bio gold, Food grade bio organic black, Food grade bio orange, Food grade bio red, Food grade bio brown, Food grade bio yellow, Food grade bio green, Food grade bio blue and Food grade bio Cobalt blue

• Biodegradable

Can settle down in the bottle. Mix them well in the 3D resin before printing. Please do not expose any 3D resins to natural or room light to prevent their curing.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)