NG 3Dresyn IJ TD90 Tough D90

NG 3Dresyn IJ TD90 Tough D90 is a tough high-performance photopolymer formulation designed for demanding inkjet 3D printing applications requiring high hardness, elevated mechanical strength, durability and good impact resistance. The material is engineered to deliver rigid structural performance together with improved toughness, very high dimensional stability and very high resolution.

This formulation provides a combination of high strength, high flexural resistance and low elongation, enabling the fabrication of durable rigid parts with good impact and shattering resistance for demanding engineering and functional applications.

Designed for use in commercial and professional inkjet 3D printing systems within industrial and engineering environments for manufacturing hard, tough and durable components.

• Tough engineering components
• Functional prototypes requiring high hardness and durability
• Mechanical housings and structural parts
• High-resolution technical models

• Tensile strength: >50 MPa (ISO 527)
• Flexural strength: >80 MPa (ISO 178)
• Young’s modulus: 2000–3000 MPa (ISO 527)
• Elongation at break: <3% (ISO 527)
• Shore hardness: D90 (ISO 868)
• Deflection temperature: >100–105°C at 0.45 MPa (ISO 75)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Resolution capability: very high
• Color: clear
• Color stability: non-settling of color
• Very low shrinkage

• Tough high-hardness material behavior
• High strength and structural integrity
• Good impact and shattering resistance
• Excellent dimensional stability
• Durable performance for demanding engineering applications

• Printing technology: inkjet 3D printing
• Compatible with most commercial and professional inkjet 3D printers
• Stratasys: Objet Eden 260V, 260VS, 333, 350, 350V, 500, 500V, 1000 Plus, J750, Objet Connex 260, 350 and 500 series
• 3D Systems: ProJet MJP 2500, 2500+, 3500, 3510 and 3600 Plastic series
• Supports increased durability of the resin tank

• Biocompatible formulation
• Organo-tin free formulation

Material properties are measured under controlled laboratory conditions and may vary depending on printer model, jetting temperature, printing conditions, build geometry and post-processing workflow.

This material is supplied as a professional manufacturing material for engineering and prototyping workflows. It is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• All our Inkjet 3D resins
• Next Generation of Inkjet resins for Engineering

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)