NG 3Dresyn IJ TFD70 tough & foldable D70

NG 3Dresyn IJ TFD70 tough & foldable D70 is a tough, flexible and foldable photopolymer formulation designed for demanding inkjet 3D printing applications requiring non-brittle behavior, good impact resistance and reliable foldability without breaking. The material is engineered to deliver durable parts with very high dimensional stability and very high resolution.

This formulation provides a combination of medium hardness, toughness and flexibility, enabling the fabrication of durable parts with high impact and shattering resistance and foldable behavior at low thickness.

Designed for use in commercial and professional inkjet 3D printing systems within industrial and engineering environments for manufacturing tough, flexible and foldable components.

• Tough and foldable engineering components
• Functional prototypes requiring flexibility and durability
• Mechanical parts requiring medium rigidity and foldability
• High-resolution technical models

• Tensile strength: <20 MPa (ISO 527)
• Flexural strength: <25 MPa (ISO 178)
• Young’s modulus: <500 MPa (ISO 527)
• Elongation at break: <40% (ISO 527)
• Shore hardness: D70 (ISO 868)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Printing shrinkage: no measurable dimensional shrinkage after calibration under validated processing conditions
• Resolution capability: very high
• Color stability: non-settling of color
• Inkjet viscosity: <20 mPas at 70°C and <15 mPas at 80°C (ISO 3219)

• Tough non-brittle material behavior
• Flexible and foldable without breaking
• High impact and shattering resistance
• Durable performance for functional applications
• Very high resolution for technical parts

• Printing technology: inkjet 3D printing
• Compatible with most commercial and professional inkjet 3D printers
• Stratasys: Objet Eden 260V, 260VS, 333, 350, 350V, 500, 500V, 1000 Plus, J750, Objet Connex 260, 350 and 500 series
• 3D Systems: ProJet MJP 2500, 2500+, 3500, 3510 and 3600 Plastic series
• Inkjet viscosity optimized for excellent inkjet printability

• Synthetic resin source
• Biocompatible formulation
• Organo-tin free formulation

Material properties are measured under controlled laboratory conditions and may vary depending on printer model, jetting temperature, printing conditions, build geometry and post-processing workflow.

This material is supplied as a professional manufacturing material for engineering and prototyping workflows. It is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• All our Inkjet 3D resins
• Next Generation of Inkjet resins for Engineering

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)