3Dresyn Perfect Cast MF Bio Castable Resin for Metal Casting

3Dresyn Perfect Cast MF Bio is a monomer-free photopolymer formulation developed for high-resolution direct investment casting applications in dental and precision metal casting workflows. The material is designed to provide clean burnout performance, dimensional stability and reliable pattern reproduction.

Intended for professional use in vat photopolymerization systems (SLA, DLP and LCD) for fabrication of castable patterns compatible with phosphate-bonded investment systems and related casting workflows.

• Direct investment casting patterns for dental frameworks and components
• Precision casting patterns for laboratory metal casting workflows
• High-resolution sacrificial patterns for small and detailed geometries
• Auxiliary castable components for professional foundry and dental laboratory use

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Printing shrinkage: no measurable dimensional shrinkage after calibration under validated processing conditions
• Resolution capability: high (process-dependent)
• Very low viscosity
• Viscosity: <30 mPas at 23°C ± 2°C (ISO 3219)

• Monomer-free formulation as supplied
• Excellent print resolution and dimensional precision
• No measurable shrinkage during printing
• No expansion during burnout
• Clean burnout with negligible residual ash content (<0.0001%) (ISO 3451-1)
• Water-cleanable (isopropanol not required)
• No post-curing required prior to investment
• Available in magenta, cyan, yellow and natural white shades without pigment sedimentation
• Organo-tin free
• Compatible with most commercial and professional SLA, DLP and LCD printers

• Burnout expansion: no measurable expansion under validated burnout conditions
• Residual ash content: <0.0001% after burnout (ISO 3451-1)

• Reliable pattern fidelity for direct investment casting workflows
• High dimensional accuracy for small and detailed geometries
• Clean burnout behavior suitable for precision casting
• Stable color distribution without pigment sedimentation
• Simplified workflow through water cleaning and no post-curing requirement prior to investment

• Insert flask into preheated oven at 200°C
• Ramp at 2°C/min to 550°C
• Hold 30 minutes at 550°C
• Ramp at 2°C/min to 720°C
• Hold 120 minutes at 720°C
• Ramp down to 640°C
• Proceed with centrifugal or vacuum casting

Material performance may vary depending on printer type, wavelength, layer thickness, build geometry, investment material, burnout schedule, flask geometry and casting process conditions. Reported values and workflow information are provided for reference purposes only and must be validated by the user for the intended application.

This material is supplied as a professional manufacturing material for casting pattern fabrication. It is not marketed as a finished medical device. The regulatory compliance of any final medical or dental device produced through subsequent casting processes remains the responsibility of the legal manufacturer.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Castable 3D Printing Resins

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)