Thinner 3Dresyn E MF Bio, Bio based and Biocompatible Monomer Free Elastic reactive diluent

Thinner 3Dresyn E MF Bio is a Monomer Free Elastic reactive diluent with low deflection temperature.

Thinner 3Dresyn E MF Bio has low viscosity and excellent viscosity reduction while imparting elasticity and 100% foldability without breaking in compatible 3D resin systems.

Designed for use as a monomer free elastic reactive diluent in compatible SLA, DLP & LCD 3D resin systems, once combined with more rigid resins.

• Reducing viscosity of compatible 3D resin systems
• Formulating elastic 3D resin systems once combined with more rigid resins

• Tensile strength: <2 MPa (ISO 527-1 / ISO 527-2)
• Young’s modulus: <50 MPa (ISO 527)
• Elongation at break: >>100% (ISO 527)
• Shore hardness: A50 (ISO 868)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: <600 mPas at 23°C ± 2°C (ISO 3219)
• Low deflection temperature (ISO 75)
• Very low shrinkage

• Imparts elasticity and 100% foldability without breaking
• Durable

• Printable by most commercial and professional SLA, DLP & LCD 3D printers once combined with more rigid resins

• Bio based resin source: >60% bio content
• Monomer Free MF
• The use of gloves and goggles is required for handlling
• Avoid always contact with skin and eyes by using gloves and goggles

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)