Thinner 3Dresyn H Bio "Hard Biocompatible diluent"
Thinner 3Dresyn H Bio is a Hard Bio based and Biocompatible diluent or thinner which has been developed to reduce the viscosity of our 3Dresyns.
Thinner 3Dresyn H Bio has very low viscosity (<150 mPas) and can be used with our 3Dresyns to reduce their viscosity without decreasing their hardness nor their curing speed.
Its use is not recommended with any of our Hard & Flexible (HF), Hard & Elastic (HE), Flexible (F), Soft (S), Soft & Flexible (SF), Elastic (E) and Super Elastic (SE) resins, since twisting and foldability resistance would decrease significantly (prints would easily break when folded or twisted).
Thinner 3Dresyn H Bio has these features and benefits:
- very low viscosity (<150 mPas) and very good viscosity reduction
- hard with minor flexibility
- biobased resin source
- medium high tensile strength >25 MPa
- elongation <5%
- very high resolution
- low shrinkage
- printable by most commercial and professional SLA, DLP & LCD 3D printers
- increased durability of the resin tank
- organo-tin free
We Also Recommend
Fine Tuner FT4 Bio "bio accelerant" for UV & Visible 3D printers and 100% Biocompatible systems
Fine Tuner FT5 Bio WS "bio accelerant" for Water Soluble UV & Visible 3D printers and 100% Biocompatible systems