Thinner 3Dresyn H Bio, hard biocompatible reactive diluent

Thinner 3Dresyn H Bio is a hard biocompatible and bio based reactive diluent with deflection temperature >40ºC.

Thinner 3Dresyn H Bio has very low viscosity and very good viscosity reduction while maintaining hard behavior with minor flexibility, durability, very high resolution and compatibility with most commercial and professional SLA, DLP & LCD 3D printers.

Designed for use as a hard biocompatible and bio based reactive diluent in compatible SLA, DLP & LCD 3D resin systems.

• Reducing viscosity of compatible 3D resin systems
• Formulating hard 3D resin systems with minor flexibility

• Tensile strength: <40 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <40 MPa (ISO 178)
• Elongation at break: <5% (ISO 527)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Shrinkage: low
• Viscosity: <100 mPas at 23°C ± 2°C (ISO 3219)
• Deflection temperature: >40ºC (ISO 75)

• Hard with minor flexibility
• Durable
• Very high resolution
• Increased durability of the resin tank

• Printable by most commercial and professional SLA, DLP & LCD 3D printers

• Biobased resin source
• Biocompatible
• Organo-tin free

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)