3D resins for Microfluidics
Our Microfluidic 3Dresyns have been designed to be printed with SLA, DLP, LCD and Inkjet 3D printers.
Discover our Clear Microfluidic 3D resins "water white and with water like viscosity" for easy cleaning of micro channels:
Microfluidic 3Dresyns |
Viscosity at 25ºC (cps)* |
Deflection temperature (ºC) |
Shore hardness |
Flexural strength (MPa) |
% Elongation |
Young´s modulus (MPa) |
Tensile strength (MPa) |
3Dresyn MF HDT LV1 Clear high deflection temperature with low viscosity |
<200 |
c. 200 |
D90
|
<40 |
<2 |
3000-4000 |
<50 |
<100-200 |
c.130 |
D80-90 |
<30 |
<2 |
2000-3000 |
<40 |
|
<100 |
<100 |
D85 |
<30 |
<10 |
<2000 |
<30 |
|
<70 |
<80 |
D85 |
<30 |
<15 |
<1800 |
<25 |
|
3Dresyn MF R-ULV1 Clear rigid with ultra low viscosity for ultra thin microchannels |
<35 |
<60 |
D70-75 |
<20 |
<20 |
<1500 |
<15 |
3Dresyn MF T-ULV1 Clear tough with ultra low viscosity for ultra thin microchannels |
<20 |
<60 |
D70-75 |
<10 |
<20 |
<1500 |
<100 |
*Note: as reference water has a viscosity of 1 cps at 25ºC
More information about our Microfluidic 3D resins:
- Please click here to read this recent Microfluidic publication where a custom designed Microfluidic 3Dresyn was used to print a microfluidic chip to collect serial synchrotron crystallographic data
- Accurate and rapid 3D printing of microfluidic devices using wavelength selection on a DLP printer
- ESRF Microfluidics 3D printed device printed with our Microfluidic 3Dresyns: ESRF VIDEO
Discover our Microfluidic 3D resins, by clicking on the icons below: