3D-ADD CCZ1 Ceramic Composite Zirconia

It is designed for making natural zirconia reinforced finishes for temporary / provisional as well as durable teeth, crown and bridges, and can be added to 3Dresyns to improve durability and long term physical and mechanical properties.

Designed for use with 3Dresyns systems to prepare zirconia reinforced composite materials for SLA, DLP & LCD 3D printing.

• Natural zirconia reinforced finishes for temporary / provisional teeth
• Natural zirconia reinforced finishes for durable teeth
• Natural zirconia reinforced finishes for crowns and bridges
• Improving durability and long term properties of reinforced composite 3D printed materials

• Mohs hardness: 8-8.5

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Ultra Low Water Absorption ULWA: <15 µg/mm3
• Stable paste / slurry
• High concentration of zirconia
• Additions of 20-30% by weight are recommended to preserve printability in most SLA, DLP & LCD printers
• Lipophilic LP version with HLB: < 7.5 (Ultra Low Water Absorption ULWA grades)
• Medium Hydrophilicity MHP version with HLB: 7.5-12
• High Hydrophilicity HHP version with HLB: >12

• Excellent reinforcing Zirconia Composite Concentrate
• It can be added to any 3Dresyn to improve their durability and long term physical and mechanical properties
• Reduces coefficient of thermal expansion of final materials
• Provides significant mechanical properties improvement and durability of reinforced composite 3D printed materials

• Easy to add and mix in any 3Dresyn
• Additions of 20-30% by weight are recommended to preserve printability in most SLA, DLP & LCD printers and provide significant mechanical properties improvement and durability of reinforced composite 3D printed materials
• Please do not expose any 3D resins to natural or room light to prevent their curing.
• Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system.

• Organo-tin free

The effect on the mechanical properties will depend on the original properties of the chosen 3Dresyn and the dosage of the concentrate used. Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)