3Dresyn BioDeg Corn H, bio based, biodegradable & compostable Hard resin with 85% Bio content

3Dresyn BioDeg Corn H is a bio based and biodegradable and compostable Hard 3D resin containing corn which has been designed for eco friendly and biodegradable SLA, DLP & LCD 3D printing. 3Dresyn Bio Deg Corn H contains 85% total bio content including corn and other bio based vegetable ingredients functionalised to react with light.

The goal of this product line is to promote the usage of bio based biodegradable SLA 3D printing by developing eco friendly biodegradable resins made with ultra high content of bio based ingredients.

3Dresyn BioDeg Corn H partially breaks down biologically into biological simpler substances.  It is compostable and safe fror aquatic life and the environment.

One of the key objectives of 3Dresyns is to design, make and promote safe and environmentally friendly 3D resins to ensure safe printing resin handling and disposal.

This product line has been designed to be environmentally friendly and exhibits these features and benefits:

• 85% bio content from renewable "green source"
• Shore hardness D70-80
• rigid with elongation <5%
• eco-friendly
• biodegradable, compliant with ISO 14855-2:2018 & ASTM D5338
• compostable and safe for aquatic life and the environment
• non-persistent and inherently biodegradable (OECD 301 F biodegradation of >80% after 60 days) after being liquefied with 3Dresyns Liquefier
• slow medium curing: typically cures in around 10-15 seconds at 50 microns Z layers when tuned with Fine Tuner FT1
• slow curing: typically cures in around 15-25 seconds at 50 microns when tuned with Fine Tuner FT5 Bio HP
• low tensile and flexural strength < 10 MPa
• rigid: Young modulus 1000-1300 MPa
• viscosity <10.000 mPas at 25ºC
  
• EN 71-3:2019 compliant
• compatible with most SLA, DLP & LCD printers from 200 to 410 nm when tuned with Fine Tuner FT1
• very low shrinkage
• BPA free
• transition metals free
• The use of Liquefier is recommended for liquefying 3D printed 3Dresyn BioDeg Corn H
• level of printing difficulty: medium-high

Note: Despite the high safety standards of this product line, gloves and goggles need to be used when handling these and any other chemicals to ensure maximum safety practices.