3Dresyn CDP-WS Water Soluble for printing, debinding and sintering ceramic, metal, polymer and exotic powders

• excellent dispersability and flow of post added sintering ceramic, metal, polymer, and exotic micron and submicron nano powders
• partially water soluble, fast debinding in water
• partially insoluble to retain the shape during thermal debinding  
• the ceramic additions can be up to 50% volume concentrations still with good flow
• very high resolution 3D printing for very high detail and resolution applications
• high print quality and speed with curing wavelengths up to 410 nm and higher upon request
• controlled and reproducible process shrinkage
• minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
• elongation <7%
• relative low viscosity, good flow
• very high resolution of 20 microns of final products
• low shrinkage
• printable by SLA DLP 3D printers
• increased durability of the resin tank
• organo-tin free
• used in combination with our Adhesive Primer 3Dresyn AP1 for promoting adhesion on the build platform when high powder loads are used
• clean and postcure your 3D prints with Cleaning Fluid WS1 Bio

Please click on this link for instructions for use: Instructions for Use "IFU" of our water soluble 3D resins