3Dresyn OD-Clear CV1 MF Bio – Monomer-Free Ceramic-Filled Dental Coating Photopolymer for Professional Laboratory Workflows

Product description

3Dresyn® OD-Clear CV1 MF Bio is a monomer-free, ceramic-filled transparent dental coating formulation developed for professional laboratory surface finishing workflows of dental components requiring enhanced abrasion resistance, optical clarity and controlled surface performance.

The monomer-free formulation architecture is designed to support reduced residual monomer content when properly cured and post-processed, while maintaining transparent surface performance under validated laboratory conditions.

Application framework

Designed for application within controlled professional laboratory environments on properly prepared dental substrates. Final suitability, validation and regulatory compliance of coated components must be assessed by the user according to the specific device design, workflow validation and applicable regulatory requirements.

Typical laboratory applications

• Professional laboratory surface finishing of dental components
• Transparent protective coating of dental substrates
• Dental components requiring enhanced abrasion resistance
• Dental components requiring optical clarity and controlled surface performance

Measured mechanical properties

• Tensile strength: > 50 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: > 90 MPa (ISO 178)
• Young’s modulus: 2500–3000 MPa (ISO 527-1 / ISO 527-2)
• Elongation at break: < 5 % (ISO 527)
• Shore hardness: D85–90 (ISO 868)

Functional performance characteristics

• High transparency and non-yellowing behavior
• Enhanced abrasion and wear resistance due to ceramic filler content
• Strong adhesion to properly prepared polymeric dental substrates under validated processing conditions
• Fast UV/visible light curing within 200–420 nm wavelength range
• Contains approximately 5% nano-ceramic fillers contributing to enhanced wear resistance and surface durability under validated curing conditions

Optical and surface performance

• Transparent coating appearance
• High optical clarity
• Controlled surface performance for dental coating workflows
• Non-yellowing behavior

Thermal, pressure and chemical resistance

Surface performance, abrasion resistance and coating durability depend on validated substrate preparation, curing conditions and laboratory workflow.

Processing and handling performance

• Strong adhesion to properly prepared polymeric dental substrates under validated processing conditions
• Fast UV/visible light curing within 200–420 nm wavelength range
• Organo-tin free formulation
• Reduced residual monomer content when properly cured and post-processed

Water sorption and solubility

• Water absorption: < 15 µg/mm³
• Water sorption: ≤ 32 µg/mm³ (reference methodology aligned with ISO 20795-1)
• Water solubility: ≤ 1.6 µg/mm³ (reference methodology aligned with ISO 20795-1)

Chemical safety indicators

• Monomer-free formulation
• Reduced residual monomer content when properly cured and post-processed
• Organo-tin free formulation

Biocompatibility framework

• Biocompatibility-related evaluations may be conducted according to relevant ISO 10993 methodologies depending on formulation version and validated processing protocol
• Assessment and certification of any final medical device incorporating this coating remain the responsibility of the legal manufacturer

Testing & processing disclaimer

Material properties and coating performance may vary depending on substrate type, surface preparation, curing conditions and laboratory workflow validation. Reported information is provided for reference only.

Printing & processing guidelines

• Application type: professional laboratory coating workflow
• Curing wavelength range: 200–420 nm
• Application substrate: properly prepared dental substrates

Why choose 3Dresyn® OD-Clear CV1 MF Bio

• Monomer-free coating formulation for improved chemical safety positioning
• Transparent coating with high optical clarity
• Enhanced abrasion and wear resistance from ceramic filler content
• Strong adhesion to properly prepared polymeric dental substrates
• Reduced yellowing with controlled surface performance
• Organo-tin free formulation

Regulatory & legal notice

This material is supplied as a professional manufacturing material for laboratory workflows. It is not marketed as a finished medical device. The regulatory classification and compliance of any final dental device manufactured or coated using this material remain the sole responsibility of the legal manufacturer in accordance with applicable regulations, including Regulation (EU) 2017/745.

Document reference: TDS-3DRESYN-OD-CLEAR-CV1-MF-BIO-EN | Version: 1.0 | Last updated: March 2026