3Dresyn OD-S – Soft Gingiva-Colored Photopolymer for Implant Model Gingival Masks

Product description

3Dresyn® OD-S is a soft, gingiva-colored photopolymer formulation developed for the fabrication of elastic gingival mask components on implant and prosthodontic laboratory models.

The material is designed to simulate soft tissue behavior in controlled dental laboratory workflows.

Application framework

Intended for professional use in vat photopolymerization systems (SLA, DLP and LCD) for laboratory model fabrication.

Suitable for producing soft gingival mask elements used in implant planning and prosthetic model preparation.

Typical applications

• Elastic gingival mask components for implant models
• Soft tissue simulation elements for prosthodontic laboratory models
• Gingival mask fabrication for treatment planning workflows
• Auxiliary soft dental model components

Measured mechanical properties

• Tensile strength: <5 MPa (ISO 527-1 / ISO 527-2 reference framework)
• Flexural strength: <5 MPa (ISO 178 reference framework)
• Young’s modulus: <5 MPa (ISO 527-1 / ISO 527-2 reference framework)
• Elongation at break: >70% (ISO 527-1 / ISO 527-2 reference framework)
• Shore hardness: A35 (ISO 868)

Measured physical properties

• Shrinkage: <1%
• Viscosity: <4000 mPas at 23°C ± 2°C (ISO 3219)

Functional performance characteristics

• Soft elastic behavior for gingival simulation
• Durable under laboratory handling
• Stable pink gingiva coloration without pigment sedimentation
• High resolution and surface detail reproduction
• Very low shrinkage

Processing and handling performance

• Low viscosity for improved printability
• Printable on most commercial and professional SLA, DLP and LCD 3D printers

Chemical and safety characteristics

• Organo-tin free formulation

Biocompatibility framework

Final device classification, validation and compliance remain the responsibility of the legal manufacturer in accordance with the intended application and applicable regulations.

Testing & processing disclaimer

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, build orientation, printing parameters, washing procedure, post-curing conditions and specimen geometry.

Disclaimer

This material is supplied as a professional laboratory manufacturing material and is not marketed as a finished medical device. The regulatory classification and compliance of any final device manufactured using this material remain the responsibility of the legal manufacturer in accordance with applicable regulations.

Document reference: TDS-OD-S-EN | Version: 1.0 | Last updated: March 2026