Discover our Cleaning Fluids for washing and cleansing your 3D prints:
| Cleaning Fluid | Main properties | Clarity of prints | Safety | Application |
| UNW1 Bio Ultra Non Whitening | Balsamic fragance cleaner with very low viscosity (<10 cps at 25ºC) and with very low hydrophillicity and polarity for washing and cleansing prints without haziness | High | No risks | Washing and light postcuring of durable prints by dipping at room temperature |
| UNW2 Bio Ultra Non Whitening | Odorless cleaner of medium viscosity (<160 cps at 25ºC) with medium hydrophobicity and polarity for washing and cleansing prints without haziness | High | No risks | Washing and light postcuring of durable prints by dipping at room temperature and for thermal postcuring up to 100ºC (or higher) |
| NW1 Bio Non Whitening | Odorless cleaner of low viscosity (<50 mPas at 25ºC) with low hydophillicity and polarity for washing and cleansing prints (confers less clarity than UNW1 & UNW2 Bio) | Medium | No risks | Washing and light postcuring of durable prints by dipping at room temperature and for for thermal postcuring up to 100ºC (or higher) |
| Bio | Odorless biocompatible cleaner of low viscosity (<50 mPas at 25ºC) with high hydrophillicity and polarity for washing and cleansing prints (confers less clarity than UNW1 Bio, UNW2 Bio and NW1 Bio) | Low | No risks | Washing and light postcuring of durable prints by dipping at room temperature |
| WS1 | Non biocompatible cleaner of ultra low viscosity (<1 mPas at 20ºC) with high hydrophillicity and polarity for washing and smoothing non water soluble and water soluble 3D prints | Low | Risks | Washing and smoothing water and non water soluble sacrificial 3D prints at room temperature |
| WS1 Bio | Bio based and biocompatible cleaner of very low viscosity (<10 mPas at 25ºC) for washing and postcuring water soluble or swellable 3D prints | NA | No risks | Washing and light postcuring water soluble or swellable 3D prints by dipping at room temperaturate |
| WS2 Bio | Odorless biocompatible cleaner of low viscosity (<20 mPas at 40ºC) with high hydrophobicity for postcuring water soluble sacrificial 3D prints (second less recommended alternative to the recommended Cleaning Fluid WS1 Bio for washing and postcuring water soluble or swellable 3D prints) | NA | No risks | Postcuring water soluble sacrificial 3D prints by inmersion or dipping |
Read and follow 3Dresyns:
- Instructions for Use IFU for ultra gloss and transparency.
- Instructions for Use IFU for biocompatible resins
- Instructions for Use IFU for colored 3D prints
- Instructions for Use IFU for water soluble sacrificial 3D printed resins
- Instructions for Use IFU for solvent soluble sacrificial 3D printed resins
- Sterilization of 3D printed resins
Sale priceFrom €30.00
Cleaning Fluid Bio for washing and cleaning 3D prints
Sale priceFrom €50.00
Cleaning Fluid NW1 Bio, biocompatible cleaner for washing prints
Sale priceFrom €50.00
Cleaning Fluid WS1 for cleaning and smoothing water & non water soluble prints
Sale priceFrom €50.00
Solvent Solution SS1 Bio for dissolving solvent soluble 3D printed materials
Sale priceFrom €50.00
Solvent Solution SS1F for fast dissolving solvent soluble 3D printed materials
Sale priceFrom €50.00
Cleaning Fluid WS1 Bio for cleaning water & non water soluble prints