3Dputty HDT-WS, our light curing Water Soluble sacrificial high Heat Deflection Temperature putty

3Dputty HDT-WS is a light curing water soluble sacrificial high Heat Deflection Temperature putty curable with UV & visible light in seconds.

Its usage is ideal as water soluble sacrificial demolding filler for filling the gap between water soluble sacrificial 3D printed molds and injector flasks. Before exposure to UV / visible light it can be modelled by hand or with a spatula, and after shaping it can be hardened in seconds to become a water soluble sacrificial high HDT filler for easy demolding.

Designed for sacrificial demolding workflows as a water soluble high HDT filler for filling gaps between water soluble sacrificial 3D printed molds and injector flasks, using UV & visible light curing.

• Water soluble sacrificial demolding filler
• Filling the gap between water soluble sacrificial 3D printed molds and injector flasks
• Easy demolding workflows
• Manual shaping and modelling before light curing

• Tensile strength: <40 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <40 MPa (ISO 178)
• Young’s modulus: >3000 MPa (ISO 527)
• Elongation at break: <2% (ISO 527)
• Shore hardness: D85 (ISO 868)

• Solubility: fast solubility in water
  

• Heat deflection temperature: up to 290C @0.45MPa (ISO 75)

• Clear / translucent non-sticky putty
• Soft, malleable, easy to shape with a spatula or by hand for easy application before curing
• Fast curing of even thick layers of several centimetres
• Sacrificial ultra hard and rigid after light curing
• Ultra Hard and Rigid UHR
• Synthetic resin source
• Long shelf life

• Photocurable with UV & visible light
• Can be modelled by hand or with a spatula before curing
• Fast curing with normal UV / visible light in seconds
• Clean and postcure your 3D prints with Cleaning Fluid WS1 Bio

• Water soluble

Use gloves to prevent skin irritation and other hazards. Read the MSDS before handling it.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• UV/Visible light curable putties, gels, fillers, and sealants
• UV/Visible light curable water soluble sacrificial putties

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)