3Dresyn TFD30 ESD, tough and foldable, ESD compliant

This formulation is engineered to provide non-brittle, highly deformable behavior, allowing parts to bend, compress and recover without breaking while maintaining excellent printability and surface resolution.

• Soft grips, seals and protective elements
• Shock-absorbing parts
• Wearable or contact components requiring elasticity
• Engineering prototypes with rubber-like behavior

• Tensile strength: <20 MPa (ISO 527)
• Flexural strength: <10 MPa (ISO 178)
• Young’s modulus: <20 MPa (ISO 527)
• Elongation at break: >45% (ISO 527)
• Shore hardness: D30 (ISO 868)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Printing shrinkage: no measurable dimensional shrinkage after calibration under validated processing conditions
• Resolution capability: very high (process-dependent)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Available colors: customizable

• Surface resistivity: <10⁹ ohms (IEC 61340-2-3)
• Compliant with ESD standards: EN 61340, EN ISO 20344–20347

• Soft, rubber-like and highly elastic material behavior
• Non-brittle and foldable without breaking
• High impact and shattering resistance
• Excellent energy absorption and deformation recovery
• Durable under repeated flexing and compression
• Very high resolution with fine feature capability

• Printing technologies: SLA, DLP and LCD
  
• Compatible with most commercial and professional systems when properly calibrated
• Stable processing behavior for flexible materials

• Biocompatible (final part validation required)
• Synthetic resin base
• Organo-tin free formulation

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, exposure conditions, layer thickness, build orientation and post-processing workflow.

This material is supplied as a professional manufacturing material for engineering and prototyping workflows. It is not marketed as a finished product. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Electrically Conductive 3D Printing Resins
• ESD 3D resins

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)