ESD 3D resins

Sort by

Electrostatic Discharge ESD safe resins and additives

This is our selection of ESD compliant and safe 3D resins and additives* for protecting 3D printed materials against premature failure or damage due to electrostatic discharge in a variety of 3D printed applications such as automotive, aerospace, electronic and electrical packaging and equipment and other plastics applications.

Our 3Dresyns ESD are "ready to print" in most SLA, DLP & LCD printers and exhibit excellent resolution with the Form 2 in open mode using Formlabs original settings of Clear version 2 and in the Form 3* using Standard Clear or Grey settings with a u niversal cartridge.

Typical properties of our Next Generation 3Dresyns*

NG 3Dresyn	Deflection Temperature (ºC)	Shore hardness	Flexural strength (MPa)	% Elongation	Young´s modulus (MPa)	Tensile strength (MPa)
3Dresyn R290D90 ESD ultra rigid up to 290C	c.290	D90	>40	<1	4000-5000	>50
3Dresyn R190D90 ESD ultra rigid up to 190C	>190	D90	>40	<2	3500-4000	>50
3Dresyn R140D90 ESD ultra rigid up to 140C	>140	D90	>40	<2.5	2700-3100	>50
3Dresyn TD90 ESD, Rigid & Tough	>100	D90	>80	<3	2000-3000	>50
3Dresyn TD80 ESD, tough	<100	D80	>50	<10	1000-2000	>40
3Dresyn TFD80 ESD, tough and foldable	<20	D80	>35	<40	<1000	<25
3Dresyn TFD70 ESD, tough and foldable	<20	D70	<25	<40	<500	<20
3Dresyn TFD30 ESD, tough and foldable	<10	D30	<10	>45	<20	<20
3Dresyn TFA70 ESD, tough and foldable	<0	A70	<10	>50	<10	<10
3Dresyn TFA60 ESD, tough and foldable	<0	A60	<10	>50	<10	<10
3Dresyn FA50 ESD, flexible	<0	A50	<5	>60	<10	<10
3Dresyn FA40 ESD, flexible	<0	A40	<5	>60	<10	<10
3Dresyn FA30 ESD, flexible	<0	A30	<5	>70	<5	<5
3Dresyn EA20 ESD, elastic	<0	A20	<3	>90	<3	<4
3Dresyn SEA10 ESD, super elastic	<0	A10	<2	>>100	<2	<2

*Note:

Some ESD 3Dresyns may need tuning with our Fine tuner FT1 and LB1 Bio to print them in specific printing specifications, such as specific z layers.

Resistivity values between 10⁹ and 10¹² ohms per square can be reached subject to printer specifications.

Our ESD resins contain certain dosage of 3D-ADD ESDA Black, our black colored antistatic ESD additive. It is opaque to light, consequently limited small dosages can be used in relatively low light power printers to preserve ESD resins printability. This fact may affect the ESD performance of our ESD resins as supplied.

It is highly recommended to purchase separately 3D-ADD ESDA Black to maximise its dosage to your printer specifications.

3D-ADD EKC1, Universal Electro Conductive Concentrated additive for clear and colored 3D resins

From 700.00 €