3D resins "like" best engineering materials
Discover our Engineering 3Dresyns with similar and even better properties than the best engineering plastics (Pictures and videos of some of our 3D printed resins)
Benefits of 3Dresyns-like portfolio:
- 3Dresyns-like properties are unique and similar in performance to the best conventional plastics, such as PEEK, Nylon, PC, etc.
- 3Dresyns-like are based on safe environmentally friendly bioplastics and can even be printed with low cost printers at room temperature (Low Viscosity LV versions).
- high viscosity HV versions can be ordered for improved mechanical performance with heated printers
Do you want to print at room temperature or at relatively high temperature?
Read about the benefits of printing with heated printers
Features of 3Dresyns-like portfolio:
- professional and hobby SLA, DLP & LCD printers can be used straight away -without any printer modifications with our Low Viscosity LV versions
- our LV versions are ready to print at room temperature in most SLA, DLP & LCD printers. They exhibit higher mechanical properties than most competitor´s resins
- our High Viscosity HV versions are ready to print at relatively higher temperature (25-40ºC) in most SLA, DLP & LCD printers. They exhibit even higher mechanical properties than LV versions
- both versions are ultra safe, do not contain any VOC´s and exhibit ultra high mechanical performance
- affordable professional heating systems can be easily installed in any printer for less than 50 Euro
PURCHASE ONLINE OUR 3DRESYNS WITH SIMILAR PROPERTIES TO THE FOLLOWING HIGH PERFORMANCE FUNCTIONAL PLASTICS:
|
3Dresyn |
Acronym |
Tg (ºC) |
Shore harenes |
Flexural strength (MPa) |
% Elongation |
Young´s modulus (MPa) |
Tensile strength (MPa) |
|
Polyetheretherketone-like |
>120 |
D85-90 |
>140 |
<3 |
2500-3700 |
>50 |
|
|
Acrylonitrile Butadiene Styrene like |
>60-90 |
D70-80 |
<80 |
<5 |
1500-2200 |
<50 |
|
|
Polyoxymethylene like |
>40 |
D80 |
<80 |
<25 |
<3000 |
50 |
|
|
High Density Polyethylene like |
<25 |
D60 |
>30 |
<100 |
800-1200 |
>25 |
|
|
High Impact Polystyrene like |
>25 |
D60 |
<65 |
<30 |
c.2000 |
<35 |
|
|
Low Density Polyethylene |
<25 |
D40-50 |
>20 |
>100 |
300-600 |
>20 |
|
|
Nylon or polyamide like |
>35 |
D70 |
40-80 |
<40 |
1200-1700 |
>40 |
|
|
Polycarbonate like |
>25 |
D60-70 |
35-80 |
<40-60 |
1000-2000 |
>35 |
|
|
Thermoplastic Urethane like |
c.25 |
D60-70 |
40-70 |
<30-50 |
900-1500 |
>50 |
|
|
Polyethylene terephthalate like |
>35 |
D60-70 |
50-80 |
<40-60 |
1300-1800 |
>30 |
|
|
Polymethylmethacrylate like |
>90 |
D85-90 |
>100 |
<6 |
c.2500 |
>50 |
|
|
Polypropylene like |
<25 |
D70 |
>30 |
<80 |
1000-1500 |
>30 |
|
|
Polyimide like |
<290 |
D85-90 |
50-70 |
>3-7 |
c.4000 |
<60 |
|
|
Sinterable Polyimide resin |
c.340 |
D90 |
c.140 |
c.10 |
c.3600 |
c.140 |
If you need help to select the right 3D resin for your needs, contact us by email: info@3dresyns.com or by whatspapp!
