3Dresyns - 24/7 services and fast Worldwide deliveries. Start ordering by clicking here!

3Dresyn Nylon-like, nylon or polyamide like

Regular price 200.00 €

Shipping calculated at checkout.

3Dresyn Nylon-like has these features and benefits:

  • ideal for the printing materials similar to Nylon / polyamide but without water absorption
  • clear finishing unless your chosen color is added online
  • tough and foldable , semirigid, pliable under pressure at low thickness <2 mm, with good memory until regains its original shape
  • high relative impact and shattering resistance (Notched Izod <80 J/m)
  • 100% biocompatible and food grade
  • choose LV version for a relatively Low Viscosity for printing without heated printers or below 25ºC
  • choose HV version for relatively High Viscosity version for printing with heated printers or above 25ºC, for overall improved durability  and mechanical properties
  • ultra pure and safe, non cytotoxic
  • based on safe monomers
  • hydrophobic, ultra low water absorption ULWA
  • ultra tough with some flexibility below 2 mm
  • Tensile strength >40 MPa
  • Flexural strength >40 MPa and up to 80 MPa with the optimum printing and postcuring process*
  • tough and flexible (Young modulus 1200-1700 MPa)
  • ideal for engineering and  biomedical systems
  • high hardness, Shore hardness D70 range
  • elongation <40%
  • Glass transition temperature >35ºC
  • LV version viscosity <10.000 cps at 25ºC
  • very low shrinkage
  • printable by SLA, DLP & LCD 3D printers
  • increased durability of the resin tank
  • organo-tin free

*IFU for 100% clarity & transparency (without any haziness or whitish finishing)

  • print your 3D designs in any SLA, DLP and/or LCD printer following our printing instructions, which can be sent upon request by email: info@3dresyns.com 
  • after printing cut the supports and eliminate the uncured resin by gravity from the surface of the prints in the upside down position in an oven heated at 55-60ºC for 30 minutes
  • postcure the dry prints in a normal light box for 30 minutes at T<50ºC
  • clean parts by spraying IPA using a spray bottle to ensure that clean IPA is always used
  • follow our more detailed Instructions for Use "IFU"