3D-ADD Anti-Slip1 Bio, anti slip additive for decreasing the slip of 3D prints

3D-ADD Anti-Slip1 Bio is an ultra effective bio anti slip additive for decreasing the slip of 3D prints.

It is designed for use with 3D printed resins at high dosage to reduce slip without affecting the clarity or color of 3D resins.

Designed for use with SLA, DLP & LCD 3D resins to decrease the slip of 3D printed materials.

• Decreasing the slip of SLA, DLP & LCD 3D printed resins

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Recommended dosage: 10% or higher
• Supplied as paste
• Clear, non colored paste filled with antislip particles
• Maximum particle size 100 microns
• Mean particle size 50 microns
• Optimum printability at 50-100 microns z layers

• Anti slip additive
• Micro textured for optimum grip
• Excellent grip and slip reduction
• Excellent compatibility and stability with SLA, DLP & LCD 3D resins
• Does not affect the clarity nor the color of 3D resins

• Please do not expose any 3D resins to natural or room light to prevent their curing.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Slip and anti slip additives
• Functional Additives

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)