NextGen 3Dresyn TD80 Tough with Shore D80

Product description

NG 3Dresyn TD80 is a tough photopolymer formulation with controlled flexibility, designed for engineering applications requiring a balance between strength, impact resistance and limited deformation. The material provides rigid behavior in bulk geometries while allowing minor flexibility in thin sections.

This formulation is optimized to deliver durable parts with improved resistance to cracking and mechanical stress, while maintaining high resolution and dimensional stability.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional and industrial environments for durable, impact-resistant and semi-rigid components.

Typical applications

• Functional engineering components with moderate flexibility
• Impact-resistant housings and enclosures
• Snap-fit and thin-wall structures
• Durable prototypes requiring toughness

Measured mechanical properties

• Tensile strength: >40 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: >50 MPa (ISO 178)
• Young’s modulus: 1000–2000 MPa (ISO 527)
• Elongation at break: <10% (ISO 527)
• Shore hardness: D80 (ISO 868)

Measured physical properties

• Shrinkage: very low (typical)
• Resolution capability: very high (process-dependent)

Functional performance characteristics

• Tough material behavior with controlled flexibility
• Minor flexibility in thin sections
• Good impact and shattering resistance
• High durability under mechanical stress
• Balanced stiffness and toughness

Processing and handling performance

• Printing technologies: SLA, DLP and LCD
• Compatible with most commercial and professional systems when properly calibrated
• Stable processing and reliable printability
• Increased durability of the resin tank during printing

Chemical and safety characteristics

• Biocompatible (final part validation required)
• Organo-tin free formulation

Testing & processing disclaimer

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, exposure conditions, layer thickness, build orientation and post-processing workflow.

Disclaimer

This material is supplied as a professional manufacturing material for engineering and prototyping workflows. It is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-NG-TD80-EN | Version: 1.0 | Last updated: March 2026