3D-ADD ASC1, anti sedimentation additive

3D-ADD ASC1 is an ultra effective anti-sedimentation additive for optimum suspension stability of pigments, fillers, organic, inorganic, ceramic and metal nano, sub micron and micron powders, nanowires and microfibers.

It is designed as a suspension stabiliser for a broad range of organic, inorganic and metallic nano and micro powders and fibers, providing a balance of flow and suspension stability in low, medium and high viscosity systems.

Designed for use with most of our SLA, DLP and LCD 3Dresyns as an anti-sedimentation additive and suspension stabiliser for systems containing pigments, fillers, ceramics, metals, powders, wires and fibers.

• Stabilising pigments, fillers, ceramics and metal particles in suspension
• Stabilising organic, inorganic and metallic nano and micro powders and fibers
• Improving suspension stability in low, medium and high viscosity systems containing micron and nano materials
• Stabilising conductive systems and biocompatible conductive systems depending on version

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Optimum dosage is typically <5-10% of total resin solids for stabilising low, medium and high viscosity systems containing micron and nano materials
• Light brownish paste which does not affect the color strength of colored 3Dresyns
• Lipophilic LP version with HLB: < 7.5 (Ultra Low Water Absorption ULWA grades)
• Medium Hydrophilicity MHP version with HLB: 7.5-12
• High Hydrophilicity HHP version with HLB: >12
• Very High Hydrophilicity VHHP version with HLB: >14. Ideal for conductive systems
• Very High Hydrophilicity VHHP Bio version with HLB: >14. Ideal for biocompatible conductive systems

• Ultra effective anti-sedimentation additive for optimum suspension stability of pigments, fillers, organic, inorganic, ceramic and metal nano, sub micron and micron powders, nanowires, and microfibers
• Ultra effective suspension stabiliser of a broad range of organic, inorganic and metallic nano and micro powders and fibers
• Ideal for stabilising in suspension pigments, fillers, ceramics and metal particles at low viscosities and excellent flow, without sedimentation issues
• Excellent stability with minor risk of chemical gelation issues
• Excellent flow and suspension stability balance

• Compatible with most of our SLA DLP and LCD 3Dresyns
• Please do not expose any 3D resins to natural or room light to prevent their curing

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)