3D-ADD TP1 Bio is our Bio based Thickening Paste for increasing the viscosity of our 3Dresyns

3D-ADD TP1 Bio is a bio-based thickening additive with very high thickening yield at low dosage.

It is designed for increasing the yield value and viscosity of VAM 3Dresyns and other high viscous resin systems used in printing technologies requiring high viscosity.

Designed for VAM printing systems and other printing technologies which require high viscous resin systems. Recommended for increasing the yield value (zero shear stress viscosity) and the viscosity of VAM 3Dresyns.

• Increasing the yield value and viscosity of VAM 3Dresyns
• VAM printing systems and other printing technologies requiring high viscous resin systems
• Preventing hanging down of VAM prints during printing
• Improving resolution during rotation of VAM resins in Computed Axial Lithography (CAL) printers

• Very high thickening yield at low dosage (5-20%)
• 55% bio content

• Bio-based thickening additive with very high thickening yield at low dosage
• Ideal to prevent any hanging down of VAM prints during printing
• Ideal to improve resolution during rotation of VAM resins in Computed Axial Lithography (CAL) printers

• Ideal for VAM printing systems and any other printing technology which requires high viscous resin systems
• Recommended for increasing the yield value (zero shear stress viscosity) and the viscosity of our VAM 3Dresyns
• Please do not expose any 3D resins to natural or room light to prevent their curing.

• Bio-based thickening additive
• Free of toxic heavy metals
• Read the MSDS before use and handle according to standard laboratory practice

Final viscosity, yield value and printing behavior depend on resin formulation, dosage and processing workflow. Optimization must be performed under actual printing conditions. Please do not expose any 3D resins to natural or room light to prevent their curing.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)