3D-ADD ROC1 Radio Opaque Concentrate Bio for printing radio opaque biocompatible devices

3D-ADD ROC1 is a Radio Opaque Concentrate Bio for printing radio opaque biocompatible devices.

It is a high viscous biocompatible radio opaque ceramic paste designed for increasing the radio opacity of 3Dresyns and for printing radio opaque devices for X ray and CT or CAT (Computerized Axial Tomography).

Designed for use with 3Dresyns systems to increase radio opacity and to prepare printable radio opaque composite resins for SLA, DLP & LCD 3D printing.

• Printing radio opaque biocompatible devices for X ray and CT or CAT (Computerized Axial Tomography)
• Checking the alignment of implants and dentures
• Applications where radio opacity is required

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• High viscous biocompatible radio opaque ceramic paste
• Imparts excellent radio opacity and contrast to any of our 3Dresyns once mixed at 35/65 ratio ROC1/3Dresyn ratio by weight
• Provides excellent radiopacity to diagnostic ionizing radiation, including X-rays, fluoroscopy and computed tomography (CT)
  
• Negligible optical absorption throughout the UV, visible and near infrared (NIR) spectral regions
• Very low shrinkage
• Lipophillc LP version with HLB: < 7.5 (Ultra Low Water Absorption ULWA grades)
• Medium Hydrophilicity MHP version with HLB: 7.5-12
• High Hydrophilicity HHP version with HLB: >12

• Ideal for increasing the radio opacity of any 3Dresyns, without affecting significantly their original mechanical properties
• Radio opaque composite concentrate resin for improved radio opacity and definition
• Printable by most commercial and professional SLA, DLP & LCD 3D printers once mixed with any of our 3Dresyns
• Increased durability of the resin tank

• Please do not expose any 3D resins to natural or room light to prevent their curing
• Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system

• Transition metal free and non radioactive
• Organo-tin free

The effect on the mechanical properties will depend on the original properties of the chosen 3Dresyn and the dosage of the concentrate used. Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)