3D-ADD Disper-All2, fast curing ultra effective dispersant

3D-ADD Disper-All2 is a general usage ultra effective wetting agent and dispersant for a broad range of organic, inorganic, ceramic and metal nano and micro powders.

It is designed for wetting and dispersing powders in high concentration systems while maintaining good flow, stability and resolution. It is also intended for wetting substrates and improving intercoat adhesion.

Designed for use with SLA, DLP, LCD & Inkjet 3Dresyns as a wetting agent and dispersant for organic, inorganic, ceramic and metal nano and micro powders.

• Wetting and dispersing pigments, fillers, ceramics and metals in 3D resins
• Making ultra high concentration dispersions of pigments, fillers, ceramics and metals
• Wetting substrates and improving intercoat adhesion
• High detail and high resolution 3D printing applications

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Relative low viscosity with good flow and long term stability
• Viscosity: optimized within the processing range required for the intended printing process and application; good flow and long-term stability
• Ultra high concentration dispersions of up to 90% solids with good flow
• Optimum dosage below 10% of total resin solids for wetting and dispersing ultra high concentrated surries
• Optimum dosage below 1% of total resin solids for wetting and dispersing pigments at low dosage
• Powder additions up to 50% volume concentrations can be made still with good flow

• Excellent general usage ultra effective wetting agent and dispersant
• Excellent wetting and dispersion yield, stability and flow of post added micron and submicron "nano" powders
• Very high resolution 3D printing for very high detail and resolution applications
• Ultra fast and harder photo reactive system vs the much slower and softer 3D-ADD Disper-All1

• Compatible with all our SLA DLP, LCD and Inkjet 3Dresyns
• Ideal for making ultra high concentration of pigments, fillers, ceramics and metals dispersions of up to 90% solids with good flow
• Ideal for wetting substrates and improving intercoat adhesion
• Please do not expose any 3D resins to natural or room light to prevent their curing.

• Bio-based and “green” made from natural biological derivatives functionalized to react fast with light
• Biodegradable

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Functional Additives
• Auxiliaries

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)