3D-ADD MGI-UHC1, microorganism growth inhibitor additive

3D-ADD MGI-UHC1 is a Microorganism Growth Inhibition (MGI) additive supplied at Ultra High Concentration (UHC). It contains a concentrated antiseptic support system intended for use in professional additive manufacturing environments.

It is designed to support contamination control strategies in liquid photopolymer workflows by reducing the risk of microbial growth in stored resin systems when used under controlled laboratory conditions.

Designed for use in compatible liquid 3D printing resins within professional laboratory and industrial additive manufacturing environments to support contamination control, resin hygiene management and bulk resin handling workflows requiring contamination risk reduction.

• Supplementary microorganism growth control in liquid 3D printing resins
• Support of resin hygiene management in laboratory or industrial environments
• Bulk resin handling workflows requiring contamination risk reduction

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Recommended concentration: 1–2% (v/v) added to compatible liquid 3D resins

• Designed to support contamination control strategies in liquid photopolymer workflows
• Reducing the risk of microbial growth in stored resin systems when used under controlled laboratory conditions
• Formulated to support inhibition of common laboratory microorganisms under controlled conditions

• Mix thoroughly under controlled lighting conditions
• Validate compatibility with each resin formulation prior to production use
• Ultra High Concentration additive solution
• Graduated measuring beaker
• Empty 250 mL black storage bottle for light protection
• All photopolymer resins must be protected from daylight and strong artificial light to prevent premature curing
• For professional users only
• Wear appropriate protective equipment (gloves, eye protection)
• Avoid skin and eye contact
• Dispose of waste according to local chemical regulations

• Supplied as a processing additive for professional laboratory and industrial use
• It is not marketed as a medical disinfectant, sterilizing agent, biocidal product or pharmaceutical antimicrobial treatment
• It is not validated as a virucidal, sporicidal or prion-inactivating agent

The effectiveness of microorganism growth inhibition depends on resin chemistry, storage conditions, environmental exposure and handling protocols. Users must independently validate performance within their workflow.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)