3D-ADD MGI1, microorganism growth inhibitor additive

3D-ADD MGI1 is a Microorganism Growth Inhibition (MGI) additive designed for professional additive manufacturing environments.

Important Regulatory Notice: 3D-ADD MGI1 is supplied as a processing additive for laboratory and industrial use. It is not marketed as a medical disinfectant, sterilizing agent, or registered biocidal product. Users are responsible for compliance with applicable local regulations regarding antimicrobial and biocidal substances.

3D-ADD MGI1 is formulated to support contamination control strategies in liquid 3D printing resin workflows by reducing the risk of microbial growth during storage and handling under controlled conditions.

Intended Use (Professional Use Only)

• Supplementary microorganism growth control in liquid photopolymer resins
• Support of resin hygiene management in laboratory or production environments
• Bulk resin storage workflows requiring contamination risk mitigation

This additive does not replace validated sterilization, aseptic processing, or regulated disinfection procedures where required.

Dosage Guidance

• Recommended concentration: 2–4% (v/v) added to compatible liquid 3D resins
• Mix thoroughly under controlled lighting conditions
• Validate compatibility with each resin formulation prior to production use

The effectiveness of microorganism growth inhibition depends on resin chemistry, environmental exposure, storage conditions and handling protocols. Performance must be validated by the user within their specific workflow.

Scope of Activity

The additive is formulated to support inhibition of common laboratory microorganisms under controlled conditions. It is not validated as a virucidal, sporicidal or prion-inactivating agent.

Supply Format

• MGI additive solution
• Graduated measuring beaker
• Empty 250 mL black storage bottle for light protection

All photopolymer resins must be protected from daylight and strong artificial light to prevent premature curing.

Handling & Safety

• For professional users only
• Wear appropriate protective equipment (gloves and eye protection)
• Avoid skin and eye contact
• Dispose of waste according to local chemical regulations

Governing Principle

Microorganism growth control in additive manufacturing workflows depends on controlled storage conditions, environmental hygiene and validated handling procedures. 3D-ADD MGI1 is a supportive additive and not a substitute for regulated sterilization or certified disinfection processes.