3D-ADD NY1 is our our Non Yellowing additive for reducing the yellowing of any clear or yellowish 3Dresyns.
It reduces yellowing significantly of any 3Dresyns without affecting their print speed.
It is a 100% Safe Biocompatible UV light protective additive with a Material Safety Data Sheet "MSDS" free of hazards and pictograms.
Its recommended dosage is 1-5% on top of resin solids. Excessive dosage will darken a bit the clarity of the printed resin, consequently add it carefully in successive steps of 1%.
Add 1, 2, 3, 4 and 5% of 3D-ADD NY1 to a small quantity of the resin (eg 10 grams) in a clear plastic cups. Then, cure the resins with different % of 3D-ADD NY1 in the light box for 1 hour. Afterwards, choose the level of clarity/non yellowing as you wish and use the corresponding % of 3D-ADD NY1 for printing.
3D-ADD NY1 is supplied as a kit, which contains 1 dispenser (dropper) with 60 grams of 3D-ADD NY1, 1 measuring flask to measure exactly the volume of 3Dresyns and 1 empty 250 mL black bottle to mix, keep and protect fine tuned liquid 3Dresyns from day light. Please do not expose 3Dresyns to direct natural or artificial room light to prevent curing.
Instructions about how to fine tune 3Dresyns to your printer settings. For more info click here