3D-ADD RCC3 Reinforced Composite Concentrate for improving the mechanical properties and electrical insulation of 3Dresyns

 3D-ADD RCC3 has these features and benefits:

• excellent Reinforced Composite Concentrate, supplied as a paste at high concentration of safe and natural based reinforcing fibers
• it can be added to any 3D resin to improve their physical and mechanical properties*:
• tensile strength may increase up to 30%
• flexural strength may increase up to 20%
• flexural modulus may increase up to 60%
• notched-Izod impact strength may increase up to 60%
• Mohs hardness: 5
• low moisture absorption
• improved thermal conductivity without decreasing electrical insulation
• thermal conductivity: 2.6-2.80 W/m °K of fiber filler
• reduced dielectric permittivity and loss of dielectric crystalline phase for high frequency electronics
• eco friendly and ultra safe, based on natural raw materials
• safe
• stable greenish grey paste / slurry
• easy to add and mix in any 3Dresyn 
• organo-tin free
• additions of 15-25% by weight are recommended to preserve printability in most SLA, DLP & LCD printers and provide significant mechanical improvement of 3D printed materials

It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight. Please do not expose any 3D resins to natural or room light to prevent their curing.

Note: the effect on the mechanical properties will depend on the original properties of the chosen 3Dresyn and the dosage of the concentrate used. Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system.

Recommendation: f you need ultra high mechanical strength with ultra high flexural strength at break 120-140 MPa (HV version), 3Dresyn PEEK-like, without any addition of 3D-ADD RCC3, is recommended instead of adding 3D-ADD RCC3 to less mechanically resistant 3D resins.