Fine Tuner FT5 Bio WS is a water soluble 100% biocompatible natural plant based photo accelerant additive specially recommended for increasing the cure speed of biocompatible 3Dresyns for high power SLA & DLP 3D printers and bioplotters working with Ultraviolet and Visible lights up to 500 nm.
Fine Tuner FT5 Bio WS is 100% safe and biocompatible and does not have any risk phrases nor pictograms.
Its usage is not recommended in too low power printers, because of the resulting slow kinetics/long exposure times, unless high dosages are used eg >6-8%.
It is recommended the use of Fine Tuner FT5 Bio WS in steps of 0.5-1% in high power printers (strong laser and high power DLP printers) and of 1-2% in low power printers (LCD & MLCD printers) to increase gradually printing speed. Avoid over dosage to avoid overcure of the resin beyond limits/specifications, resulting in potential loss of resolution, precision, and dimensional accuracy of your prints.
It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight. Please do not expose any 3D resins to natural or room light to prevent their curing.

Note: Fine Tuner FT5 Bio WS is specially recommended for Ultraviolet & Visible light wavelengths (150-500 nm range) and for medium and high light power printers (most SLA laser based & DLP printers). Its print speed can result being too slow in low power LCD printers at low dosage.