3Dresyn-ase EBC1, Enzymatic Bio Catalyst for biodegradation of 3D prints

3Dresyn-ase EBC1 is a liquid Enzymatic Bio Catalyst for fast hydrolysis and biodegradation of 3D printed materials in the outdoor environment.

It has been specially designed to biodegrade 3Dresyn CD Bio D and 3Dresyn Bio D as well as other 3D printed materials and plastics.

Additions at dosage of 0.5% by weight to liquid SLA 3D resins promote that 3D printed materials hydrolyse and break down by enzymatic attack into smaller fragments.

This technology exhibits an increased ability for biodegradation of 3D printed materials and plastics, contributing to breakdown of microplastics. 3Dresyn-ase EBC1 accelerates biodegradation by increasing the susceptibility for microorganisms and bacteria to break them down into smaller and smaller fragments over time.

The goal of this product line is to develop enzymatic bio catalysts for biodegradation research of 3D printed materials.

3Dresyn-ase EBC1 accelerates the biological breakdown into simpler substances through the action of enzymes. Under suitable conditions, the organic substances may be progressively converted into simpler molecules such as water, methane and carbon dioxide.

One of the key objectives of 3Dresyns is to design, make and develop functional 3D resins, additives and biodegradation promoters for material development and degradation research.

Designed for use in liquid SLA, DLP & LCD 3D resin systems to promote enzymatic biodegradation of 3D printed materials and plastics in degradation research workflows.

• Promoting biodegradation of 3D printed materials in the outdoor environment
• Biodegradable SLA, DLP & LCD 3D printing research workflows
• Enzymatic biodegradation studies of 3D printed materials and plastics
• Biodegradation support for 3Dresyn CD Bio D and 3Dresyn Bio D

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Recommended dosage: 0.5% by weight
• Supplied in liquid form
• 60 grams dispenser is normally used at 0.5% dosage and is enough for at least 12 kgs of 3D resins

• Probiodegradant by enzymatic attack
• Compatible with most commercial SLA, DLP & LCD 3D resins
• Promotes hydrolysis and biodegradation of 3D printed materials
• Contributes to breakdown of microplastics
• Accelerates biological breakdown into simpler molecules such as water, methane and carbon dioxide under suitable conditions

• Easy addition by simple mixing in any liquid SLA, DLP & LCD 3D resin
• Please do not expose any 3D resins to natural or room light to prevent their curing.
• Monitoring of the biodegradation can be done with our Degradation-Tester

• Enzymatic biodegradation additive
• Free of toxic heavy metals
• Read the MSDS before use and handle according to standard laboratory practice

Performance depends on the used dosage, the used 3D resin, and the exposure conditions for biodegradation. Final biodegradation behavior and disposal suitability must be validated by the user according to the intended application and disposal conditions.

This material is supplied as a professional processing additive and is not marketed as a finished product. Final performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)