3D-ADD NY1 Bio, non yellowing Bio based and Biocompatible additive

3D-ADD NY1 Bio is a non yellowing bio based and biocompatible additive for reducing the yellowing of clear or yellowish 3Dresyns.

It reduces yellowing significantly of 3Dresyns without affecting their print speed. It is supplied in two versions with different bio content.

Designed for reducing the yellowing of clear or yellowish 3Dresyns without affecting print speed.

• Reducing yellowing of clear or yellowish 3Dresyns

• Recommended dosage: 1-5%, in successive steps of 1% by weight on top of resin solids
• Excessive dosage will create a light bluish tinge of the printed resin
• Available in a 65% Bio content bio based version

• Reduces yellowing significantly of any 3Dresyns
• Does not affect print speed
• UV light protective additive

• Add 1, 2, 3, 4 and 5% of 3D-ADD NY1 Bio to a small quantity of the resin (eg 10 grams) in clear plastic cups
• Cure the resins with different % of 3D-ADD NY1 Bio in the light box for 1 hour
• Afterwards, choose the level of clarity/non yellowing as you wish and use the corresponding % of 3D-ADD NY1 Bio for printing
• Please do not expose any 3D resins to natural or room light to prevent their curing

• Non Yellowing Bio based and Biocompatible additive
• 65% Bio content bio based additive with a Material Safety Data Sheet "MSDS" with skin and eye irritancy hazards and pictograms (still biocompatible after curing and post processing)

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)