3Dresyn Perfect Cast LPP for Low Power SLA, DLP & LCD Printers LPP has these features and benefits:
- ideal for Direct investment Casting "DC"
- designed for very high detail applications and Low Power SLA, DLP & LCD Printers
- high resolution up to 20 microns
- burnable and castable with excellent burn out without any imperfections even with cheap gypsums
- easy and clean burn out with negligible residual ash content <0.0001%
- safe, bio based from renewable resources, without any toxic pictograms
- water cleanable (isopropanol is not needed!)
- very low viscosity (<30 cps at 25C)
- no shrinkage during 3D printing
- no expansion during burn out
- excellent resolution and dimensional precision
- no postcuring is needed
- printable with most commercial and professional SLA, DLP & LCD 3D printers
- available in magenta, cyan, yellow and natural white without any color sedimentation even after months
- available in 250, 500 and 1000 grams bottles
- increased durability of the resin tank
- organo-tin free
Burnout process:
- Insert flask in the preheated oven at 200ºC
- Ramp 2ºC/ minute up to 550ºC
- Hold at 550ºC for 30 minutes
- Ramp 2ºC/ minute up to 720ºC
- Hold at 720ºC for 120 minutes
- Ramp -2ºC/ minute down to 640ºC
- Cast molten metal inside the mold with a centrifuge or with a vacuum machine
