Special Metallic Colors

3Dresyns Special Metallic Colors are designed for coloring SLA, DLP & LCD 3D resins.

They provide special metallic effects and are compatible with all our 3Dresyns and with most commercial SLA, DLP & LCD 3D resins.

Designed for coloring SLA, DLP & LCD 3D resins and enabling metallic visual effects in additive manufacturing workflows.

• Coloring SLA, DLP & LCD 3D resins
• Metallic visual effects in 3D printed parts

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Viscosity: optimized within the processing range required for the intended printing process and application
• Dosage: 0.2-0.4% by weight
• Easy to disperse powders
• Each 10 grams sample is enough for coloring up to 5 kgs of 3D resins

• Special metallic effects
• Excellent color yield and strength even at very low dosage
• Excellent light fastness
• Color intensity and shade can be tuned with small additions of black color

• Compatible with most SLA, DLP & LCD 3D resins
• Please do not expose any 3D resins to natural or room light to prevent their curing

• Mix them well in the 3D resin before printing.

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

For special-effect coloration, compare metallic color routes with the wider 3Dresyns color family and fluorescent coloration options.

• 3Dresyns Colors
• Fluorescent Yellow Color

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)