Menu
Cart

Fine Tuner FT4 Bio HP Hydro-Phillic ultra safe "bio photo accelerant" for UV & Visible up to 500 nm 3D printers and 100% Biocompatible systems

  • 200.00 €

Let us know your SLA, DLP or LCD printer model

Fine Tuner FT4 Bio HP is a Hydro-Phillic (non water soluble) version of Fine Tuner FT4 Bio with the same kinetics performance. It is a 100% biocompatible accelerant additive specially recommended for increasing the cure speed of our 3Dresyns in SLA, DLP and Inkjet 3D printers working with Ultraviolet and Visible light from 150 to 500 nm: including the far, medium and near UV range, as well as the visible range: daylight, visible lasers, LEDS and DLP projectors.
If you need water soluble /compatible 100% biocompatible  accelerant additives please click on: Fine Tuner FT5 Bio WS

The use of Fine Tuner FT4 Bio HP is ideal for increasing the print speed  of hydrophillic biocompatible resin systems in Ultraviolet and Visible SLA, DLP printers and bioplotters since it is an ultra safe, not cytotoxic, hydrophillic ultra low water absorption 100% biocompatible material (without any labels/pictograms).

Its use is essential in UV/Visible 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor curing or exposure time (seconds), because speeds up the cure and fine tunes the quality of your prints. Its usage is not recommended for low power LCD printers, because of the resulting slow kinetics/long exposure times.

Fine Tuner FT4 Bio HP is supplied as a kit in 2 colored versions: strong and pale yellow:

  • strong yellow version: 50 grams of strong yellow powder or 100 mL of strong yellow liquid at 50% powder concentration. Ideal for strong colored biocompatible systems or
  • pale yellow version: 50 grams of pale yellow powder or 100 mL of pale yellow liquid at 50% powder concentration. Ideal for clear biocompatible systems

Both versions are supplied with one measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresyns from day light. Please do not expose 3Dresyns  to direct natural daylight or artificial room  light to prevent curing.


.

Note:  Fine Tuner FT4 Bio HP is specially recommended for Ultraviolet & Visible  light wavelengths (150-500 nm range) and for medium and high light power printers (most SLA laser based and DLP printers). Its print speed can result being too slow in low power LCD printers.

Instructions about how to fine tune 3Dresyns to your printer settings. For more info click here


We Also Recommend